EcHo
2003-01-05, 18:10:11
Meine Vorgehensweise:
1. Im Mandrake Kontrollzentrum erfolgreich Wine installiert, wie es bei M9.0 dabei ist.
2. die Verzeichnisse
/windows
/windows/system
/windows/windows
/home/ICH/.wine/
angelegt.
3. die Config (/etc/wine/config)nachgebessert (rest nichts verändert):
WINE REGISTRY Version 2
;; All keys relative to \\Machine\\Software\\Wine\\Wine\\Config
;; If you think it is necessary to show others your complete config for a
;; bug report, filter out empty lines and comments with
;; grep -v "^;" ~/.wine/config | grep '.'
;;
;; MS-DOS drives configuration
;;
;; Each section has the following format:
;; [Drive X]
;; "Path"="xxx" (Unix path for drive root)
;; "Type"="xxx" (supported types are 'floppy', 'hd', 'cdrom' and 'network')
;; "Label"="xxx" (drive label, at most 11 characters)
;; "Serial"="xxx" (serial number, 8 characters hexadecimal number)
;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat', 'win95'/'vfat', 'unix')
;; This is the FS Wine is supposed to emulate on a certain
;; directory structure.
;; Recommended:
;; - "win95" for ext2fs, VFAT and FAT32
;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended)
;; DON'T use "unix" unless you intend to port programs using Winelib !
;; "Device"="/dev/xx" (only if you want to allow raw device access)
;;
[Drive A]
"Path" = "/mnt/floppy"
"Type" = "floppy"
"Label" = "Floppy"
"Filesystem" = "win95"
"Device" = "/dev/fd0"
[Drive C]
"Path" = "/windows"
"Type" = "hd"
"Label" = "Windows"
"Filesystem" = "win95"
[Drive D]
"Path" = "/mnt/cdrom"
"Type" = "cdrom"
"Label" = "CD-Rom"
"Filesystem" = "win95"
; make sure that device is correct and has proper permissions !
"Device" = "/dev/cdrom"
[Drive E]
"Path" = "/tmp/winetmp-${USER}"
"Type" = "hd"
"Label" = "Tmp Drive"
"Filesystem" = "win95"
[Drive F]
"Path" = "${HOME}"
"Type" = "network"
"Label" = "Home"
"Filesystem" = "win95"
[wine]
"Windows" = "c:\\windows"
"System" = "c:\\windows\\system"
"Temp" = "e:\\"
"Path" = "c:\\windows;c:\\windows\\system;e:\\;e:\\test;f:\\"
"Profile" = "c:\\windows\\Profiles\\Administrator"
"GraphicsDriver" = "x11drv"
; Wine doesn't pass directory symlinks to Windows programs by default.
; Enabling this may crash some programs that do recursive lookups of a whole
; subdir tree in case of a symlink pointing back to itself.
;"ShowDirSymlinks" = "1"
"ShellLinker" = "wineshelllink"
# <wineconf>
[Version]
; Windows version to imitate (win95,win98,winme,nt351,nt40,win2k,winxp,win20,win30,win31)" },
"Windows" = "win98"
; DOS version to imitate
;"DOS" = "6.22"
4. die config nach /.wine kopiert.
WAS habe ich vergessen, wenn ich ein setup aufrufe (bash$ wine /mnt/cdrom/autosetup.exe ) bekomme ich diesen Fehler:
Warning: could not find wine config [Drive x] entry for current working directory /mnt/cdrom; starting in windows directory.
/usr/bin/wine.bin: cannot find 'autorun.exe'
Hab ich was vergessen? Hab zwar ein paar Tuts durchgelesen, aber irgendwie steht da nix von nem Eintrag bzw. von nem link auf die config.
1. Im Mandrake Kontrollzentrum erfolgreich Wine installiert, wie es bei M9.0 dabei ist.
2. die Verzeichnisse
/windows
/windows/system
/windows/windows
/home/ICH/.wine/
angelegt.
3. die Config (/etc/wine/config)nachgebessert (rest nichts verändert):
WINE REGISTRY Version 2
;; All keys relative to \\Machine\\Software\\Wine\\Wine\\Config
;; If you think it is necessary to show others your complete config for a
;; bug report, filter out empty lines and comments with
;; grep -v "^;" ~/.wine/config | grep '.'
;;
;; MS-DOS drives configuration
;;
;; Each section has the following format:
;; [Drive X]
;; "Path"="xxx" (Unix path for drive root)
;; "Type"="xxx" (supported types are 'floppy', 'hd', 'cdrom' and 'network')
;; "Label"="xxx" (drive label, at most 11 characters)
;; "Serial"="xxx" (serial number, 8 characters hexadecimal number)
;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat', 'win95'/'vfat', 'unix')
;; This is the FS Wine is supposed to emulate on a certain
;; directory structure.
;; Recommended:
;; - "win95" for ext2fs, VFAT and FAT32
;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended)
;; DON'T use "unix" unless you intend to port programs using Winelib !
;; "Device"="/dev/xx" (only if you want to allow raw device access)
;;
[Drive A]
"Path" = "/mnt/floppy"
"Type" = "floppy"
"Label" = "Floppy"
"Filesystem" = "win95"
"Device" = "/dev/fd0"
[Drive C]
"Path" = "/windows"
"Type" = "hd"
"Label" = "Windows"
"Filesystem" = "win95"
[Drive D]
"Path" = "/mnt/cdrom"
"Type" = "cdrom"
"Label" = "CD-Rom"
"Filesystem" = "win95"
; make sure that device is correct and has proper permissions !
"Device" = "/dev/cdrom"
[Drive E]
"Path" = "/tmp/winetmp-${USER}"
"Type" = "hd"
"Label" = "Tmp Drive"
"Filesystem" = "win95"
[Drive F]
"Path" = "${HOME}"
"Type" = "network"
"Label" = "Home"
"Filesystem" = "win95"
[wine]
"Windows" = "c:\\windows"
"System" = "c:\\windows\\system"
"Temp" = "e:\\"
"Path" = "c:\\windows;c:\\windows\\system;e:\\;e:\\test;f:\\"
"Profile" = "c:\\windows\\Profiles\\Administrator"
"GraphicsDriver" = "x11drv"
; Wine doesn't pass directory symlinks to Windows programs by default.
; Enabling this may crash some programs that do recursive lookups of a whole
; subdir tree in case of a symlink pointing back to itself.
;"ShowDirSymlinks" = "1"
"ShellLinker" = "wineshelllink"
# <wineconf>
[Version]
; Windows version to imitate (win95,win98,winme,nt351,nt40,win2k,winxp,win20,win30,win31)" },
"Windows" = "win98"
; DOS version to imitate
;"DOS" = "6.22"
4. die config nach /.wine kopiert.
WAS habe ich vergessen, wenn ich ein setup aufrufe (bash$ wine /mnt/cdrom/autosetup.exe ) bekomme ich diesen Fehler:
Warning: could not find wine config [Drive x] entry for current working directory /mnt/cdrom; starting in windows directory.
/usr/bin/wine.bin: cannot find 'autorun.exe'
Hab ich was vergessen? Hab zwar ein paar Tuts durchgelesen, aber irgendwie steht da nix von nem Eintrag bzw. von nem link auf die config.