S370sNAKE
2003-05-22, 01:51:13
Habe gerade etwas gelesen, was mich etwas geärgert hat.
Dachte bei dem IC7 fehlen nur das GBitLan mit CSA und der SI3112A- SATA Controller :o
Nun les ich das auf Anandtech:
However, you'll be happy to know that there is a much lower-cost version of the IC7-G, aptly dubbed the IC7.
The only difference between the IC7 and IC7-G is that the IC7 lacks Gigabit LAN via the CSA bus,
no Serillel 2 adapter (for converting your Parallel ATA hard drive's interface to Serial ATA, quite a handy feature)
and lastly, only two Serial ATA connectors; the third and forth SI3112A-controlled SATA connectors are missing from the IC7
(but present on the IC7-G reviewed here today).
Ich hatte gelesen auf abit-usa.com, man bräuchte Seriell2 Adapter um P-ATA HDD´s am S-ATA CHR5 anschließen zu können und 1 Adapter kommt 25€.
Ich kauf doch nicht 2 Adapter für 50€ :bonk: und hätte normalerweise beim IC7-G noch LAN, etc. dabei.
Da ich noch 2 WD800JB habe, hätte ich gern mal RAID0 probiert, dachte aber ich müsse in jedem Falle die Adapter dazu kaufen.
Bin ja davon ausgegangen das nur das LAN und der SI-Controller fehlen.
Wer hat ein IC7-G und kann bestätigen, das dort 2 Seriell2 Adapter mit bei sind?*grrr*
Dann würde ich noch ein IC7-G ordern, da die 50€ Mehrpreis ja die Adapter beinhalten und noch das LAN mit CSA und den SI-Controller.
Ja, und ich weiß das RAID0 keine Sicherheit bietet,:stareup: wenn 1 HDD ausfällt. Wenn ich nur 1 HDD betreibe habe ich die auch nicht, also :naughty:
Habe noch eine 3.HDd, auf der werde ich dann regelmäßig sichern.
Dachte bei dem IC7 fehlen nur das GBitLan mit CSA und der SI3112A- SATA Controller :o
Nun les ich das auf Anandtech:
However, you'll be happy to know that there is a much lower-cost version of the IC7-G, aptly dubbed the IC7.
The only difference between the IC7 and IC7-G is that the IC7 lacks Gigabit LAN via the CSA bus,
no Serillel 2 adapter (for converting your Parallel ATA hard drive's interface to Serial ATA, quite a handy feature)
and lastly, only two Serial ATA connectors; the third and forth SI3112A-controlled SATA connectors are missing from the IC7
(but present on the IC7-G reviewed here today).
Ich hatte gelesen auf abit-usa.com, man bräuchte Seriell2 Adapter um P-ATA HDD´s am S-ATA CHR5 anschließen zu können und 1 Adapter kommt 25€.
Ich kauf doch nicht 2 Adapter für 50€ :bonk: und hätte normalerweise beim IC7-G noch LAN, etc. dabei.
Da ich noch 2 WD800JB habe, hätte ich gern mal RAID0 probiert, dachte aber ich müsse in jedem Falle die Adapter dazu kaufen.
Bin ja davon ausgegangen das nur das LAN und der SI-Controller fehlen.
Wer hat ein IC7-G und kann bestätigen, das dort 2 Seriell2 Adapter mit bei sind?*grrr*
Dann würde ich noch ein IC7-G ordern, da die 50€ Mehrpreis ja die Adapter beinhalten und noch das LAN mit CSA und den SI-Controller.
Ja, und ich weiß das RAID0 keine Sicherheit bietet,:stareup: wenn 1 HDD ausfällt. Wenn ich nur 1 HDD betreibe habe ich die auch nicht, also :naughty:
Habe noch eine 3.HDd, auf der werde ich dann regelmäßig sichern.